讲解数控开料机的工作原理
先将预制有环状“V”字缺口需要切断分离的棒，管坯料通过夹紧机构加紧，送进机构将其逐渐送入到振动下料机中；
First prefabricated circular "V" word gap need to cut off the separation of stick, tube billet by clamping mechanism of tightening, send into institutions to gradually into it to vibration cutting machine;
然后使棒料在振动数控开料机构中沿着环状“V”字形缺口的根部产生低周疲劳断裂，从而形成良好的分离断面。数控排钻
Then make the bar in the numerical control cutting vibration institutions along the annular gap "V" glyph roots to produce low cycle fatigue fracture, thus forming a good separation section.
一旦棒料被分离切断，夹紧机构松开，送进机构后退到位。
Separation once the bar is cut off, loosen the clamping institutions, send into institutions back in place.
再重复循环上述的动作过程，进行下一个分离切断动作，夹紧和进送机构均采用液压缸驱动。
, repeat cycle of the above action process under a separate cutting action, clamping and into send agencies are driven by hydraulic cylinder.